You are here: Home » News » Industry News » Do you have a good understanding of the cap sewing machine?

Do you have a good understanding of the cap sewing machine?

Views: 0     Author: Site Editor     Publish Time: 2021-10-01      Origin: Site

Do you have a good understanding of the cap sewing machine?

Compared with common sewing machines, cap sewing machines can not only realize intelligent control, greatly improve production efficiency and reduce operation difficulty but also have the machinery to complete part of the operator's work, reducing labor costs. If you are interested in a cap sewing machine, you can continue reading.

Here is the content list:

What are the advantages of a cap sewing machine?

Why does the fabric always wrinkle when using the cap sewing machine?

Common problems and solutions when using a cap sewing machine.



What are the advantages of a cap sewing machine?

(1) Low noise and low vibration design.

The cap sewing machine uses an electronic LCD screen, and the structure of the machine case to the small parts of each part are optimized. As a result, it can minimize noise and vibration in daily work. In addition, the cap sewing machine achieves the best balance in the design of the machine head. The transmission of the upper shaft and the lower shaft is driven by a synchronous toothed belt, which greatly reduces the noise and realizes low vibration and low noise work.


(2) High degree of automation and labor-saving operation.

The cap sewing machine can automatically complete the set sewing work. Such as automatic seam, automatic adjustment of sewing thread tension of thick and thin sewing material, automatic speed change, automatic torque change, automatic thread trimming, automatic needle compensation, and so on.


Why does the fabric always wrinkle when using the cap sewing machine?

1. The stitches of the cap sewing machine are too large for certain fabrics;

2. The needle tip of the cap sewing machine is dull;

3. Improper thread tension;

4. The presser foot is not strong enough;

5. The fabric is too light and thin;

6. The diameter or material of the upper thread and the bottom thread used is different.


Common problems and solutions when using a cap sewing machine.

Irregular movement of the fabric is the most common problem.

Due to the loosening of the teeth screws of the cap sewing machine, the teeth will sway from side to side during operation, so that the cloth cannot be moved forward regularly. The treatment method is to remove the needle plate. Tighten the two teeth screws. After tightening, install the needle plate and check whether the two sides of the teeth rub against the edge of the needle plate groove. If there is friction, it will cause noise and machine weight. At this time, only remove the needle plate and loosen the teeth screws. Adjust the position of the teeth to the middle of the needle plate slot, tighten the teeth screws, and then install the needle plate.


Guangdong Jinyuelai Automation Equipment Co., Ltd. was established in July 2005 and is located in Dongguan City, Guangdong Province, China. It is a high-tech enterprise specializing in the research and development, production, and sales of industrial sewing machines. To meet the needs of different groups of people, the company has produced different types of cap sewing machines. People can choose the cap sewing machines that suit their needs according to their needs. If you are engaged in the cap sewing machine business, you can consider using our cost-effective products.


ABOUT US

A high-tech company which specialized in the R&D, production and also sale of industrial sewing machines. 
 

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

86-18922964048
NO. 13 ChangPing  Commercial  Street  ,Daojiao Town Dongguan City GuangDong Province,China
Copyright © 2021 Guangdong Jin Yue Lai Automation Equipment Co.,Ltd. Supported by Leadong